How to keep a tube top up (and what to wear under it)

Smiling woman in a sand ribbed tube top and linen trousers at a sunny beachside cafe

Short answer: a tube top slips when it is doing the bust's job. Take the weight off it with a backless stick-on Lift Bra or Body Tape underneath, then press a strip of double-sided Clothing Tape along the top edge to hold it to your skin. Choose a top that is snug at the top edge, and do a quick arms-up test before you leave.

Why tube tops fall down

  • Weight: without support underneath, the top carries the bust and slides down.
  • Fit: a top edge that is even slightly loose rolls and slips.
  • Fabric: satin and smooth jersey slide more than ribbed knit.
  • Movement: raising your arms and twisting lifts the hem and pulls the top edge down.

The two-tape method

  1. Support underneath: apply a Lift Bra over Nipple Covers, or Body Tape for a fuller bust, on clean, dry skin. Wait about 20 minutes.
  2. Put on the tube top and position the top edge where you want it.
  3. Tape the edge: stick short strips of Clothing Tape on the inside of the top edge, at the center front and at each side, and press to your skin.
  4. Test: raise both arms, twist and sit. Add a strip where it moves.

What to wear under a tube top

Situation Best option
A or B cup, ribbed top Covers, plus Clothing Tape at the edge
Want shape or lift Lift Bra over covers
D cup and up Body Tape with a crossover; see boob tape for large breasts
Thin or satin bandeau Lift Bra; avoid strapless bras with a band
Cropped tube top Nothing below the bust; see crop tops

Strapless dresses and jumpsuits

The same method keeps strapless dresses, bandeau swim tops and strapless jumpsuits in place. See strapless dresses and jumpsuits.

Fit tip

When buying a tube top, choose the size that is snug at the top edge, even if it feels firm at first. Ribbed and elasticated tops hold better than smooth ones.

Key facts

  • Take the weight off the top with a Lift Bra or Body Tape.
  • Clothing Tape at the center front and sides holds the edge to your skin.
  • Snug, ribbed tops slip less than loose, smooth ones.
  • Do the arms-up test before you leave.

Frequently asked questions

How do you keep a tube top from falling down?

Put double-sided clothing tape along the top edge, pressed to your skin, and add lift underneath with a stick-on bra or body tape so the top is not carrying the bust's weight.

What bra do you wear with a tube top?

A backless stick-on bra or body tape. A strapless bra with a band can slide down and show a band line under thin tube tops.

Why does my tube top keep slipping?

Usually the top is too loose at the top edge, the fabric is slippery, or it is carrying the weight of the bust. Tape the edge and add lift underneath.

Can you wear a tube top with a big bust?

Yes. Use body tape with a crossover for lift, then clothing tape along the top edge.

Shop Clothing Tape